Send Us Emailresponse@vacuumtraydryerindia.com
Contact Us+91 88791 92449 | +91 98338 65058
GMP-compliant Vacuum Tray Dryer (VTD) manufactured by Bipin Pharma Equipment and supplied factory-direct to pharmaceutical, chemical, food, and nutraceutical companies in Ankleshwar, Gujarat — with installation, commissioning, and after-sales support.
Ankleshwar, with the adjoining Panoli and Jhagadia estates in Bharuch district, is one of India's foremost API and bulk drug manufacturing centres. Hundreds of synthesis-based plants here run reactors, dryers, filters, and granulation equipment around the clock, producing APIs and intermediates for domestic formulators and regulated export markets. Equipment in Ankleshwar must handle solvents, vacuum duty, and strict cGMP expectations. Bipin Pharma Equipment has manufactured exactly this class of machinery since 1995 and supplies Ankleshwar factory-direct from Vasai up the NH-48 corridor.
Ankleshwar sits on the NH-48 route from our Vasai works — dependable next-day delivery and scheduled engineer visits for the Bharuch API belt.
A Vacuum Tray Dryer (VTD) removes moisture and solvents from materials under reduced pressure — typically 25 to 100 mmHg — which lowers the boiling point of moisture and enables drying at temperatures as low as 40 to 80 degrees C. Heat is supplied indirectly through steam- or hot-water-heated shelves, while a vacuum pump extracts vapours to a condenser for solvent recovery. This closed, GMP-compliant batch system is ideal for heat-sensitive APIs, granules, bulk drugs, and chemical intermediates.
Vacuum operation dries heat-sensitive products at 40 to 80 degrees C without thermal degradation.
Condenser and receiver recover IPA, acetone, methanol, ethanol, and other solvents — cutting raw material cost and meeting VOC norms.
Steam or hot-water heated hollow shelves give even heat across every tray.
Full vacuum-tight construction with SS 316L internals (Ra 0.6 micron finish) for contamination-free batch drying.
12, 24, 48, and 96-tray standard models up to 400 kg per batch, plus fully custom builds.
SS 304, SS 316, SS 316L, and Hastelloy with optional fluoropolymer contact coatings.
| Model | Trays | Capacity (kg/batch) | Vacuum (mmHg) | MOC |
|---|---|---|---|---|
| VTD-12 | 12 | Up to 50 | 25-760 | SS304 / SS316L |
| VTD-24 | 24 | Up to 100 | 25-760 | SS304 / SS316L |
| VTD-48 | 48 | Up to 200 | 25-760 | SS316L / Hastelloy |
| VTD-96 | 96 | Up to 400 | 25-760 | SS316L |
| Custom | As required | As required | As required | Any MOC |
Specifications are indicative and subject to change for product improvement. Custom configurations are available on request.
Bipin Pharma Equipment supplies, installs, and services the Vacuum Tray Dryer across all major industrial belts of Ankleshwar and surrounding Gujarat region, including:
We manufacture all three major dryers — FBD, Vacuum Tray Dryer, and hot-air Tray Dryer — and recommend the right one for your Ankleshwar plant's product, not the only one we make.
Steam, electric, hot water, or thermic fluid heating configured to the utilities actually available at your Ankleshwar facility.
Complete DQ/IQ/OQ/PQ, material certificates, and FAT — the paperwork Ankleshwar exporters and audit-facing plants need with every dryer.
Established in 1995 with 1120+ installations and exports to 25+ countries — proven machinery, not experiments, for your Ankleshwar plant.
You buy directly from the manufacturer — no dealers, no middlemen — with competitive pricing and a detailed quotation typically within 24 hours.
Our engineers handle delivery coordination, erection, commissioning, operator training, and ongoing service support at your Ankleshwar facility.
Yes. Evaporated solvents such as IPA, acetone, methanol, and ethanol are drawn into a condenser and collected in a receiver vessel — reducing raw material cost, supporting VOC compliance, and preventing environmental discharge.
Standard models offer 12, 24, 48, and 96 trays of 700 x 450 mm with capacities up to 400 kg per batch, vacuum levels of 25 to 760 mmHg, and heating by steam, hot water, or thermic fluid. Fully custom configurations are also manufactured.
Yes — API manufacturing is a core application for our equipment. We build in SS 316L and Hastelloy with solvent-compatible seals, vacuum-rated construction where applicable, and complete qualification documentation for cGMP API facilities.
Where the process involves solvents, we configure equipment with appropriate condensers, receivers, and vacuum systems for solvent recovery — reducing raw material cost and meeting pollution control norms that apply across the Ankleshwar–Panoli belt.
Share your batch size, material, and application — our engineers will recommend the right Vacuum Tray Dryer model for your Ankleshwar facility and send a detailed, no-obligation quotation within 24 hours.
Send Enquiry Call: +91 88791 92449