Send Us Emailresponse@vacuumtraydryerindia.com
Contact Us+91 88791 92449 | +91 98338 65058
GMP-compliant Vacuum Tray Dryer (VTD) manufactured by Bipin Pharma Equipment and supplied factory-direct to pharmaceutical, chemical, food, and nutraceutical companies in Thane, Maharashtra — with installation, commissioning, and after-sales support.
Thane district hosts one of Maharashtra's densest concentrations of pharmaceutical, chemical, and cosmetic manufacturing, with long-established industrial estates at Wagle Estate, Kolshet, Ghodbunder, and the wider Bhiwandi–Kalyan belt. Formulation plants, third-party manufacturers, and bulk drug units here regularly upgrade granulation, drying, and filtration lines to keep pace with GMP audits and export commitments. Bipin Pharma Equipment is itself registered in Thane district — our Vasai works make us effectively a home-district supplier for every Thane buyer.
Bipin Pharma Equipment is located in Thane district itself (Vasai) — the closest possible manufacturer for Thane-based pharma plants.
A Vacuum Tray Dryer (VTD) removes moisture and solvents from materials under reduced pressure — typically 25 to 100 mmHg — which lowers the boiling point of moisture and enables drying at temperatures as low as 40 to 80 degrees C. Heat is supplied indirectly through steam- or hot-water-heated shelves, while a vacuum pump extracts vapours to a condenser for solvent recovery. This closed, GMP-compliant batch system is ideal for heat-sensitive APIs, granules, bulk drugs, and chemical intermediates.
Vacuum operation dries heat-sensitive products at 40 to 80 degrees C without thermal degradation.
Condenser and receiver recover IPA, acetone, methanol, ethanol, and other solvents — cutting raw material cost and meeting VOC norms.
Steam or hot-water heated hollow shelves give even heat across every tray.
Full vacuum-tight construction with SS 316L internals (Ra 0.6 micron finish) for contamination-free batch drying.
12, 24, 48, and 96-tray standard models up to 400 kg per batch, plus fully custom builds.
SS 304, SS 316, SS 316L, and Hastelloy with optional fluoropolymer contact coatings.
| Model | Trays | Capacity (kg/batch) | Vacuum (mmHg) | MOC |
|---|---|---|---|---|
| VTD-12 | 12 | Up to 50 | 25-760 | SS304 / SS316L |
| VTD-24 | 24 | Up to 100 | 25-760 | SS304 / SS316L |
| VTD-48 | 48 | Up to 200 | 25-760 | SS316L / Hastelloy |
| VTD-96 | 96 | Up to 400 | 25-760 | SS316L |
| Custom | As required | As required | As required | Any MOC |
Specifications are indicative and subject to change for product improvement. Custom configurations are available on request.
Bipin Pharma Equipment supplies, installs, and services the Vacuum Tray Dryer across all major industrial belts of Thane and surrounding Maharashtra region, including:
We manufacture all three major dryers — FBD, Vacuum Tray Dryer, and hot-air Tray Dryer — and recommend the right one for your Thane plant's product, not the only one we make.
Steam, electric, hot water, or thermic fluid heating configured to the utilities actually available at your Thane facility.
Complete DQ/IQ/OQ/PQ, material certificates, and FAT — the paperwork Thane exporters and audit-facing plants need with every dryer.
Established in 1995 with 1120+ installations and exports to 25+ countries — proven machinery, not experiments, for your Thane plant.
You buy directly from the manufacturer — no dealers, no middlemen — with competitive pricing and a detailed quotation typically within 24 hours.
Our engineers handle delivery coordination, erection, commissioning, operator training, and ongoing service support at your Thane facility.
Yes. Evaporated solvents such as IPA, acetone, methanol, and ethanol are drawn into a condenser and collected in a receiver vessel — reducing raw material cost, supporting VOC compliance, and preventing environmental discharge.
Standard models offer 12, 24, 48, and 96 trays of 700 x 450 mm with capacities up to 400 kg per batch, vacuum levels of 25 to 760 mmHg, and heating by steam, hot water, or thermic fluid. Fully custom configurations are also manufactured.
Faster than any outstation supplier — our works are at Vasai in Thane district itself. Standard models can be delivered, installed, and commissioned at Thane-area plants including Wagle Estate, Kolshet, Ambernath, and Badlapur with minimal transit time and cost.
Yes. We supply complete DQ/IQ/OQ/PQ documentation, material test certificates, and FAT support with every machine — exactly what Thane formulation and API units need for WHO-GMP and customer audits.
Share your batch size, material, and application — our engineers will recommend the right Vacuum Tray Dryer model for your Thane facility and send a detailed, no-obligation quotation within 24 hours.
Send Enquiry Call: +91 88791 92449