Send Us Emailresponse@vacuumtraydryerindia.com
Contact Us+91 88791 92449 | +91 98338 65058
GMP-compliant Vacuum Tray Dryer (VTD) manufactured by Bipin Pharma Equipment and supplied factory-direct to pharmaceutical, chemical, food, and nutraceutical companies in Nashik, Maharashtra — with installation, commissioning, and after-sales support.
Nashik is one of Maharashtra's fastest-growing pharmaceutical clusters, with formulation plants, ayurvedic and nutraceutical manufacturers, and food processing units concentrated in Satpur, Ambad, Sinnar, and Igatpuri MIDC areas. Competitive land and power costs continue to draw new pharma investment to the district, and with it steady demand for granulation, drying, blending, and filtration machinery. Bipin Pharma Equipment serves Nashik manufacturers directly from Vasai — a short haul up the Mumbai–Agra highway — with factory-direct pricing and responsive service.
Nashik is a few hours from our Vasai works via NH-160/Mumbai–Agra highway — quick delivery and easy engineer access for commissioning and service.
A Vacuum Tray Dryer (VTD) removes moisture and solvents from materials under reduced pressure — typically 25 to 100 mmHg — which lowers the boiling point of moisture and enables drying at temperatures as low as 40 to 80 degrees C. Heat is supplied indirectly through steam- or hot-water-heated shelves, while a vacuum pump extracts vapours to a condenser for solvent recovery. This closed, GMP-compliant batch system is ideal for heat-sensitive APIs, granules, bulk drugs, and chemical intermediates.
Vacuum operation dries heat-sensitive products at 40 to 80 degrees C without thermal degradation.
Condenser and receiver recover IPA, acetone, methanol, ethanol, and other solvents — cutting raw material cost and meeting VOC norms.
Steam or hot-water heated hollow shelves give even heat across every tray.
Full vacuum-tight construction with SS 316L internals (Ra 0.6 micron finish) for contamination-free batch drying.
12, 24, 48, and 96-tray standard models up to 400 kg per batch, plus fully custom builds.
SS 304, SS 316, SS 316L, and Hastelloy with optional fluoropolymer contact coatings.
| Model | Trays | Capacity (kg/batch) | Vacuum (mmHg) | MOC |
|---|---|---|---|---|
| VTD-12 | 12 | Up to 50 | 25-760 | SS304 / SS316L |
| VTD-24 | 24 | Up to 100 | 25-760 | SS304 / SS316L |
| VTD-48 | 48 | Up to 200 | 25-760 | SS316L / Hastelloy |
| VTD-96 | 96 | Up to 400 | 25-760 | SS316L |
| Custom | As required | As required | As required | Any MOC |
Specifications are indicative and subject to change for product improvement. Custom configurations are available on request.
Bipin Pharma Equipment supplies, installs, and services the Vacuum Tray Dryer across all major industrial belts of Nashik and surrounding Maharashtra region, including:
We manufacture all three major dryers — FBD, Vacuum Tray Dryer, and hot-air Tray Dryer — and recommend the right one for your Nashik plant's product, not the only one we make.
Steam, electric, hot water, or thermic fluid heating configured to the utilities actually available at your Nashik facility.
Complete DQ/IQ/OQ/PQ, material certificates, and FAT — the paperwork Nashik exporters and audit-facing plants need with every dryer.
Established in 1995 with 1120+ installations and exports to 25+ countries — proven machinery, not experiments, for your Nashik plant.
You buy directly from the manufacturer — no dealers, no middlemen — with competitive pricing and a detailed quotation typically within 24 hours.
Our engineers handle delivery coordination, erection, commissioning, operator training, and ongoing service support at your Nashik facility.
Yes. Evaporated solvents such as IPA, acetone, methanol, and ethanol are drawn into a condenser and collected in a receiver vessel — reducing raw material cost, supporting VOC compliance, and preventing environmental discharge.
Standard models offer 12, 24, 48, and 96 trays of 700 x 450 mm with capacities up to 400 kg per batch, vacuum levels of 25 to 760 mmHg, and heating by steam, hot water, or thermic fluid. Fully custom configurations are also manufactured.
Yes. Alongside allopathic pharma, many Nashik ayurvedic, herbal, and nutraceutical producers use our machines. The same GMP-grade construction — SS 316L contact parts, easy cleaning, validated documentation — applies across all these applications.
We manufacture a wide capacity range, from compact R&D and small-batch models to full production scale, at factory-direct prices with no dealer margin. Share your batch size and we will recommend the right economical model for your Nashik unit.
Share your batch size, material, and application — our engineers will recommend the right Vacuum Tray Dryer model for your Nashik facility and send a detailed, no-obligation quotation within 24 hours.
Send Enquiry Call: +91 88791 92449