Send Us Emailresponse@vacuumtraydryerindia.com
Contact Us+91 88791 92449 | +91 98338 65058
GMP-compliant Vacuum Tray Dryer (VTD) manufactured by Bipin Pharma Equipment and supplied factory-direct to pharmaceutical, chemical, food, and nutraceutical companies in Hyderabad, Telangana — with installation, commissioning, and after-sales support.
Hyderabad is the bulk drug capital of India, producing a major share of the country's APIs and hosting global-scale formulation, vaccine, and biotech companies across Jeedimetla, Pashamylaram, Bollaram, Genome Valley, and the upcoming Pharma City corridor. Equipment buyers here are among the most technically demanding in the industry, specifying validated GMP machinery for regulated markets including the US and EU. Bipin Pharma Equipment supplies Hyderabad manufacturers with the same export-grade machines we ship to 25+ countries, delivered from our Vasai works with full documentation and commissioning support.
Hyderabad plants receive machines by dedicated transport from Vasai with protective export-grade packing, followed by engineer visits for erection and commissioning.
A Vacuum Tray Dryer (VTD) removes moisture and solvents from materials under reduced pressure — typically 25 to 100 mmHg — which lowers the boiling point of moisture and enables drying at temperatures as low as 40 to 80 degrees C. Heat is supplied indirectly through steam- or hot-water-heated shelves, while a vacuum pump extracts vapours to a condenser for solvent recovery. This closed, GMP-compliant batch system is ideal for heat-sensitive APIs, granules, bulk drugs, and chemical intermediates.
Vacuum operation dries heat-sensitive products at 40 to 80 degrees C without thermal degradation.
Condenser and receiver recover IPA, acetone, methanol, ethanol, and other solvents — cutting raw material cost and meeting VOC norms.
Steam or hot-water heated hollow shelves give even heat across every tray.
Full vacuum-tight construction with SS 316L internals (Ra 0.6 micron finish) for contamination-free batch drying.
12, 24, 48, and 96-tray standard models up to 400 kg per batch, plus fully custom builds.
SS 304, SS 316, SS 316L, and Hastelloy with optional fluoropolymer contact coatings.
| Model | Trays | Capacity (kg/batch) | Vacuum (mmHg) | MOC |
|---|---|---|---|---|
| VTD-12 | 12 | Up to 50 | 25-760 | SS304 / SS316L |
| VTD-24 | 24 | Up to 100 | 25-760 | SS304 / SS316L |
| VTD-48 | 48 | Up to 200 | 25-760 | SS316L / Hastelloy |
| VTD-96 | 96 | Up to 400 | 25-760 | SS316L |
| Custom | As required | As required | As required | Any MOC |
Specifications are indicative and subject to change for product improvement. Custom configurations are available on request.
Bipin Pharma Equipment supplies, installs, and services the Vacuum Tray Dryer across all major industrial belts of Hyderabad and surrounding Telangana region, including:
We manufacture all three major dryers — FBD, Vacuum Tray Dryer, and hot-air Tray Dryer — and recommend the right one for your Hyderabad plant's product, not the only one we make.
Steam, electric, hot water, or thermic fluid heating configured to the utilities actually available at your Hyderabad facility.
Complete DQ/IQ/OQ/PQ, material certificates, and FAT — the paperwork Hyderabad exporters and audit-facing plants need with every dryer.
Established in 1995 with 1120+ installations and exports to 25+ countries — proven machinery, not experiments, for your Hyderabad plant.
You buy directly from the manufacturer — no dealers, no middlemen — with competitive pricing and a detailed quotation typically within 24 hours.
Our engineers handle delivery coordination, erection, commissioning, operator training, and ongoing service support at your Hyderabad facility.
Yes. Evaporated solvents such as IPA, acetone, methanol, and ethanol are drawn into a condenser and collected in a receiver vessel — reducing raw material cost, supporting VOC compliance, and preventing environmental discharge.
Standard models offer 12, 24, 48, and 96 trays of 700 x 450 mm with capacities up to 400 kg per batch, vacuum levels of 25 to 760 mmHg, and heating by steam, hot water, or thermic fluid. Fully custom configurations are also manufactured.
Our machines are engineered to cGMP standards — SS 316L mirror-polished contact parts, crevice-free construction, complete DQ/IQ/OQ/PQ documentation, and FAT — the documentation package Hyderabad facilities supplying regulated markets require. Final regulatory compliance rests with facility qualification, which our documents fully support.
Yes. Our equipment serves API units in Jeedimetla, Bollaram, and Pashamylaram as well as formulation and biotech plants — with configurations matched to each application, from corrosive-duty API processing to formulation-grade granulation and drying.
Share your batch size, material, and application — our engineers will recommend the right Vacuum Tray Dryer model for your Hyderabad facility and send a detailed, no-obligation quotation within 24 hours.
Send Enquiry Call: +91 88791 92449