Send Us Emailresponse@vacuumtraydryerindia.com
Contact Us+91 88791 92449 | +91 98338 65058
GMP-compliant Vacuum Tray Dryer (VTD) manufactured by Bipin Pharma Equipment and supplied factory-direct to pharmaceutical, chemical, food, and nutraceutical companies in Vadodara, Gujarat — with installation, commissioning, and after-sales support.
Vadodara is a major hub for pharmaceuticals, fine chemicals, and engineering in central Gujarat, with active industrial estates at Makarpura, Savli, Halol, and the nearby Nandesari chemical zone. The city's pharma and chemical units — from API and intermediate producers to formulation plants — run continuous investment cycles in drying, granulation, and filtration capacity. Bipin Pharma Equipment serves Vadodara buyers directly from our Vasai works on the Mumbai–Vadodara NH-48 corridor, one of the best-connected industrial routes in western India.
Vadodara lies directly on the NH-48 corridor from our Vasai factory — straightforward same-day/next-day delivery and easy service access.
A Vacuum Tray Dryer (VTD) removes moisture and solvents from materials under reduced pressure — typically 25 to 100 mmHg — which lowers the boiling point of moisture and enables drying at temperatures as low as 40 to 80 degrees C. Heat is supplied indirectly through steam- or hot-water-heated shelves, while a vacuum pump extracts vapours to a condenser for solvent recovery. This closed, GMP-compliant batch system is ideal for heat-sensitive APIs, granules, bulk drugs, and chemical intermediates.
Vacuum operation dries heat-sensitive products at 40 to 80 degrees C without thermal degradation.
Condenser and receiver recover IPA, acetone, methanol, ethanol, and other solvents — cutting raw material cost and meeting VOC norms.
Steam or hot-water heated hollow shelves give even heat across every tray.
Full vacuum-tight construction with SS 316L internals (Ra 0.6 micron finish) for contamination-free batch drying.
12, 24, 48, and 96-tray standard models up to 400 kg per batch, plus fully custom builds.
SS 304, SS 316, SS 316L, and Hastelloy with optional fluoropolymer contact coatings.
| Model | Trays | Capacity (kg/batch) | Vacuum (mmHg) | MOC |
|---|---|---|---|---|
| VTD-12 | 12 | Up to 50 | 25-760 | SS304 / SS316L |
| VTD-24 | 24 | Up to 100 | 25-760 | SS304 / SS316L |
| VTD-48 | 48 | Up to 200 | 25-760 | SS316L / Hastelloy |
| VTD-96 | 96 | Up to 400 | 25-760 | SS316L |
| Custom | As required | As required | As required | Any MOC |
Specifications are indicative and subject to change for product improvement. Custom configurations are available on request.
Bipin Pharma Equipment supplies, installs, and services the Vacuum Tray Dryer across all major industrial belts of Vadodara and surrounding Gujarat region, including:
We manufacture all three major dryers — FBD, Vacuum Tray Dryer, and hot-air Tray Dryer — and recommend the right one for your Vadodara plant's product, not the only one we make.
Steam, electric, hot water, or thermic fluid heating configured to the utilities actually available at your Vadodara facility.
Complete DQ/IQ/OQ/PQ, material certificates, and FAT — the paperwork Vadodara exporters and audit-facing plants need with every dryer.
Established in 1995 with 1120+ installations and exports to 25+ countries — proven machinery, not experiments, for your Vadodara plant.
You buy directly from the manufacturer — no dealers, no middlemen — with competitive pricing and a detailed quotation typically within 24 hours.
Our engineers handle delivery coordination, erection, commissioning, operator training, and ongoing service support at your Vadodara facility.
Yes. Evaporated solvents such as IPA, acetone, methanol, and ethanol are drawn into a condenser and collected in a receiver vessel — reducing raw material cost, supporting VOC compliance, and preventing environmental discharge.
Standard models offer 12, 24, 48, and 96 trays of 700 x 450 mm with capacities up to 400 kg per batch, vacuum levels of 25 to 760 mmHg, and heating by steam, hot water, or thermic fluid. Fully custom configurations are also manufactured.
Both. Vadodara's chemical and API producers use our equipment in corrosive-duty configurations — SS 316L, Hastelloy, and fluoropolymer-coated contact surfaces (Halar, PFA, PVDF) are available where aggressive solvents or intermediates are processed.
Standard models ship quickly from our Vasai works, and Vadodara's position on NH-48 means transit is usually next-day. Custom-built machines carry a fabrication lead time which we confirm with your quotation.
Share your batch size, material, and application — our engineers will recommend the right Vacuum Tray Dryer model for your Vadodara facility and send a detailed, no-obligation quotation within 24 hours.
Send Enquiry Call: +91 88791 92449